Once AGL has confirmed details of a digital meter installation at your property, a qualified electrical installer will be sent to complete the installation. Sometimes during the process, an issue (commonly called a ‘site defect’) is discovered which prevents the installer from continuing immediately with the job. This could include the discovery of electrical issues or on-site contaminants, like asbestos. If this occurs, the meter installer will provide you with information outlining the site defect, why it prevented installation, who is responsible for rectification works and who you should contact to discuss the matter further.
Note that wiring issues associated with the circuitry in the home, the switchboard and the meter box remain the responsibility of the homeowner.
Yes – if AGL hasn’t contacted you about a meter upgrade, you can request a digital meter installation.
If you’d like to enquire about a digital meter, or a product or service that may require a digital meter, simply contact us.
No – having a digital meter installed does not affect your customer rights or the protections provided to you under the National Energy Retail Rules. You still have the right to seek and access energy concessions, rebates and hardship schemes offered by AGL, other retailers or the State Government (where applicable in conjunction with each scheme’s conditions). You also retain access to existing dispute resolution paths.
No – if AGL has contacted you to offer a digital meter upgrade, you’re not obliged to accept the offer and can continue to use your existing meter if it functions accurately.
Note that from 1 December 2017, if your existing meter is found to be faulty or has reached its typical end-of-life, you must follow your retailer’s instruction and provide safe access for the installation of a digital meter.
Digital meter data is secure and confidential. There are strict guidelines in place for the protection of this information, whether it’s collected from your existing meter or a digital meter. The collection, use and disclosure of metering data is also subject to strict confidentiality rules, and access to electricity usage data and other information is restricted.
By law, metering data can only be accessed by customers, the meter reader, your energy retailer and others who are entitled to it (e.g. authorised bodies, distribution networks or third party service providers with your consent).
AGL and other retailers must comply with the Privacy Act Cth. (1988), which includes the National Australian Privacy Principles; these principles set clear restrictions on the use, disclosure and storage of personal information.
Yes – a digital meter installation can still proceed, however the meter technician will need to test the strength of the telecommunications signal to your property. If the signal is found to be too weak to deliver remote services (such as meter readings) to your home, the wireless communications signal may need to be switched off and alternative arrangements put in place. We’ll discuss these alternative arrangements with you if they’re necessary.
Yes – having a digital meter should not prevent you from transferring to another retailer. If you experience any difficulties, start by contacting your existing retailer.
If you continue to experience transfer issues, the independent Ombudsmen in your State may be able to help.
All wiring issues associated with the circuitry in the home, the switchboard and the meter box are the responsibility of the homeowner. If a site defect has been discovered at your home, get in touch with your landlord or real estate agency and ask them to address the problem. AGL can guide you through the process.
Digital meter data is secure and confidential. AGL and our metering service providers must adhere to tight privacy controls and compliance with the Privacy Act Cth. (1988) and the Australian Privacy Principles, which cover the collection, use, disclosure and storage of personal information.