Can anybody please tell me where the decimal should be between these black and red numbers? I have taken a photo of my unit's hot water gas meter, which reads 02402145 (see below). Per AGL website I would read 240.2145 but the bill said is 100 times this figure and then multiple by 10, so it is 1000 times the reading?
Total usage for 31 days per the bill I received is 7767MJ . We just have 2 adults and one small kid in an old unit. It is quite surprise and ridiculous that we could use so much hot water in 31 days and we dun use dishwashing machine and wash the dishes with cold water, the major usage is just shower.
Besides, in my first bill, the usage MJ for both gas meters are exactly the same, I feel strange on that.
Any help would be appreciated.
Solved! Go to Answer
With this particular meter it’s the black and white number and the first two red numbers.
So the meter reading is 24021.45, if you enter this in it should be accepted.
If you have any issues, reach out via messenger you can do this either via My Account or the AGL App.
otal usage for 31 days per the bill I received is 7767MJ . We just have 2 adults and one small kid in an old unit. It is quite surprise and ridiculous that we could use so much hot water in 31 days and we dun use dishwashing machine and wash the dishes with cold water, the major usage is just shower.
We just use 85MJ for gas for cooking. While and your suggested 5 people average energy is 1900MJ, while you charge us 7767MJ with just 2people+small kid. There should be something wrong with your calculations.
I appreciate your concern with the bill.
So we can review this matter further please reach out via messenger or over the phone via the below link. We will be able to discuss the bill further with you and ensure it is all correct.
based on the black for digit, while red is decimal, i can read 240.21.
I have tried to refer to the answer here
Thank you for contacting us.
Yes that is right you would enter it as 240.
If you need further assistance please contact us here through your AGL app.
I have the same problem and my meter reading includes the first two red digits as a whole number instead of decimals - and of course this is my biggest gas bill forever... I questioned the Jemena and customerreads team and they said this is the right way to read the meter. So I think something wrong in the formulas to calculating the MJs from the readings..........
Not sure where we can go to and find the readings usage and more details about the calculations.
Welcome to AGL Community!
You can find further information on how the calculations are worked out here: